New Vicem 67 Cruiser designed for the modern cruising yachtsman - News - NAUTICA REPORT
News / New Vicem 67 Cruiser designed for the modern cruising yachtsman
New Vicem 67 Cruiser designed for the modern cruising yachtsman

New Vicem 67 Cruiser designed for the modern cruising yachtsman

- Hull No. 1 features solid cold-molded construction, West System epoxy

 

- A three-stateroom, four-head layout incorporates popular comfort features 

 

- Powered by twin 1,000-hp Volvo Penta diesels with conventional shaft drives

 

- The new Vicem cruises at 16 knots and top out at 25 knots

 

Vicem Yachts is excited to announce the launch of a new cold-molded motoryacht, the Vicem 67 Cruiser.

 

Her traditional profile with a flying bridge and hardtop, bringing together Vicem’s timeless design with numerous features that today’s boaters want in their next yacht.

 

“The 67 Cruiser is a new design that accommodates the needs of our clients who may want to cruise the open ocean,” says Sinan Unal, Chief Naval Architect and Marine Engineer. “With the benefit of comfortable accommodations, space for a crew to manage the yacht, and additional fly bridge space, our cold-molded construction allows our clients to get everything they want in a yacht that’s beyond the ordinary.”
 

 
 
 

A Traditional Profile Finished with Proper Yacht Features

 

An elegant motor yacht, the Vicem 67 Cruiser features a classic layout with five distinct social areas, including a formal dining area to port with seating for four with a galley opposite that can be open or closed off, depending on owner preference, and equipped for the discriminating chef with abundant space on corian counters, and a full slate of appliances. The saloon has facing settees port and starboard, served by a table on a high-low pedestal. The lower helm is open to the social areas of the main deck, and has a side door for easy access to the side decks. Since the additional design, Vicem has added a day head to the main deck to ensure guest comfort under way.

 

Port and starboard stairs from the aft deck provide simple three-step access to a broad to swimming platform, which lowers hydraulically into the water for bathing. The aft deck is shaded by the large flybridge overhang and  features a wide transom settee served by a solid-wood table for al fresco dining for eight. 
 

  
 

The flybridge provides shelter to the upper helm station, as well as forward-facing companion seating, an al fresco galley console, and a U-shaped settee. The flybridge can be a gathering spot for owner and guests on pleasant days at sea.

 

At anchor, a large foredeck sun pad on the trunk cabin is equipped with a folding awning for wind and sun protection. There’s also a forward-facing settee at thebow. Wide side decks is protected by high bulwarks topped with a stainless steel bowrail to lend safe access to the foredeck.
 

 

 

The Interior Features Details Worthy of a Vicem

 

The interior is finished in Vicem’s signature book-matched veneers, with the builder’s craftsmanship on full display. This tradition works with an updated design with a three-part wooden and glass sliding door that opens wide to add an indoor-outdoor feel to the saloon and cockpit.

 

Belowdecks, the Vicem 67 Cruiser features a three-stateroom layout, including both forward and amidships masters with king-size beds, as well as an en suite starboard guest stateroom with a double bed. Throughout the build, craftsmanship is apparent in the finishes and attention to detail. Stowage in lighted hanging lockers, beneath berths, and in nightstands can accommodate owner and guests for extended cruises. Heads features wood-framed, tempered-glass shower doors, corian counters, and premium fixtures. A crew’s quarters for two is located aft and has an eat-in galley, laundry facilities, and a head with separateshower.
 

 

 

Proper Cold-Molded Construction

 

Built with a hard-chined planning hull, the Vicem 67 Cruiser is constructed of cold-molded plywood mahogany using West System epoxy, resulting in a strong hull that’s light in weight. The build uses cold-molded plywood decks, superstructure, and housetop, sheathed with one ply of E-glass biaxial fabric with epoxy coating and lamination. The deck and house-top structure use mahogany framing and beams.

 

Mahogany and hardwood are used in the stringers, keelson, and sheer, and the structural engine beds are cold-molded, laminated mahogany. The hull-deck joint is glued and mechanically fastened. Vicem uses epoxy undercoating, fairing compound, and barrier coat in addition to anti-fouling on all hull surfaces below the waterline. In addition, the builder has used acrylic coatings for the topsides and boot stripe. Quarter guards and rub rails have been laminated mahogany with stainless strikers.
 

 
 

Propulsion and Performance

 

Power for the Vicem 67 Cruiser is a pair of 1,000-horsepower Volvo Penta D13 diesels using conventional shaft drives and custom designed 4-blades Nibral propellers. Speeds with the standard engines are a 16-knot cruise and a 25-knot top speed approx. With that engine package, the range at cruise is 800 nautical miles, with a 2,250-nautical-mile range at 8 knots. Engine options include 725-horsepower Volvo Penta D11s and 900-horsepower Volvo Penta D13s.

 

Brief Specification of the Vicem 67 Classic

 

LOA

 

70’9”

 

21.57 m

 

Hull Length

 

65’0”

 

19.80 m

 

LWL

 

59’8”

 

18.18 m

 

Beam

 

18’1”

 

5.50 m

 

Max Propeller Draft

 

5’8”

 

1.73 m

 

Fuel

 

2,110 gal.

 

8,000 L

 

Water

 

300 gal.

 

1,135 L

 

Holding

 

240 gal.

 

900 L

 

Displ. (full load

 

113,980 lb.

 

51,700 kg

 

Engines(standard) - 2x1,000-hp Volvo Penta D13 CruisingSpeed 16knots

Maximum Speed - 25knots

Range@Cruise - 800 nautical miles Range @ 8 knots 2,250 nauticalmiles

 

www.vicemyachts.com

 

Press Office / Sand People Communication

 

Titolo del:
TI POTREBBE INTERESSARE ANCHE

Assonautica Italiana - Venezia: il rilancio parte anche dalla nautica. Varata oggi una barca in legno elettrica

La scure che si è abbattuta su Venezia a causa del lockdown per il covid-19, ved...

Da Monte Carlo Yachts il nuovo MCY 76 Skylounge

Conto alla rovescia per il lancio del MCY 76 Skylounge, secondo modello della coll...

La Soprintendenza del Mare in collaborazione con la Guardia di Finanza e BCsicilia recupera un’ancora di epoca ellenistico-romana

Nei fondali di San Vito Lo Capo, nel Trapanese, la Soprintendenza del Mare, in collabor...

Tecnorib vara i primi due modelli di Pirelli 42 con motori fuoribordo

Oggi e lo scorso 14 maggio TecnoRib ha varato i primi due gommoni PIRELLI 42 con motori...

La nautica: un giacimento da valorizzare, due progetti di Assonautica

I numeri sulla nautica italiana ballano, ma  restiamo un paese di marinai, forse c...
Turismo e ormeggi
Il Lago di Varano (FG)
di Giulio Galassi
Questo lago ha la forma grossolana di un trapezio, largo una decina di chilometri, che si addentra per circa sette nella massa montuosa del Gargano. 
Il suo perimetro scarsamente frastagliato, ha uno sviluppo di circa 33 km. Il f
Fonte: Nautica Report
Titolo del: 31/05/2020 07:00

© Copyright 2011-2020 - Nautica Report - Reg. Tribunale di Roma n.314 - 27-12-2013 - Editore Carlo Alessandrelli - Conc. Pubb. Wave Promotion srls - P.Iva: 12411241008



iubenda

HOME - REDAZIONE - MEDIA KIT - LAVORA CON NOI